Drywall Repair · Nashville, TN
Drywall Installation in Nashville
New walls and ceilings hung, taped and finished to a stated level rather than an assumed one.
Estimate request
Show us the hole, crack or stain
Straight to us, and a reply the same day.
Drywall Installation in Nashville, Tennessee
New walls and ceilings hung, taped and finished to a stated level rather than an assumed one.
Nashville's Drywall Repair does drywall installation for homeowners across Middle Tennessee — licensed, insured, with the price in writing before the work starts. Drywall contractors who match the texture, feather the patch until it vanishes, and clean up the dust.
Why homeowners call
What usually makes the wall worth a call
- Nail pops across a whole wall
- Crack that keeps coming back
- Ceiling stained after a leak
- Patch that stands out worse than the hole
- Popcorn ceiling you want gone
- Corner beads cracked and chipped
What is included
Tape, mud and texture: what drywall installation includes
- Framing checked for flatness before any board goes up
- Board hung perpendicular to the framing
- Screws set to depth rather than overdriven
- Joints staggered rather than stacked
- Corner bead fixed and coated
- Finished to an agreed level, stated in writing
- Moisture-resistant board in wet areas
- Site cleared and offcuts removed
How a drywall installation job goes, coat by coat
Finish level is a specification, not an opinion. Level 3 is fine under heavy texture, level 4 is standard under flat paint, level 5 is a full skim for critical lighting. Agreeing it beforehand is what prevents an argument at the end.
Hanging perpendicular to the framing is not an aesthetic preference. It spans more framing members per sheet and produces a visibly flatter wall with fewer joints capable of moving.
Overdriven screws are the most common defect in fast-hung drywall. A screw that breaks the paper face has lost most of its holding power, and that is exactly what produces a wall full of pops a year later.
Flatness is checked before boarding, because a bowed stud cannot be corrected with compound afterwards without skimming the entire wall.
Also available
More drywall and ceiling work
Drywall Repair & Patching
Holes, cracks, dents and door handles through the wall, patched and finished so the repair disappears.
Learn moreCeiling Repair
Sagging, cracked and stained ceilings put right, including the joint work that stops the crack coming back.
Learn moreWater-Damaged Drywall
Cutting back to sound material, confirming it is dry, and rebuilding — not skimming over a wet board.
Learn moreTexture Matching
Knockdown, orange peel, skip trowel and hand textures matched to the existing wall, which is the part most patches fail.
Learn morePopcorn Ceiling Removal
Scraped, skimmed and refinished flat, with the room sealed and the asbestos question answered first.
Learn moreService area
Walls and ceilings patched throughout Middle Tennessee
Besides Nashville, our drywall crews work in 64 towns across 12 counties, and in any part of Middle Tennessee about an hour or less from Nashville.
FAQ
Drywall Installation: questions homeowners ask us
What does a level 5 drywall finish mean?
The highest standard: taped, three coats on the joints, and a thin skim coat over the entire surface so there is no difference in texture between the paper and the compound. It is what smooth walls need under a gloss paint or in raking light from a big window. Most houses are finished to level 4 — joints and fasteners only — and it is fine under a matte paint.
How long does hanging and finishing drywall take?
Hanging a room is a day; finishing is three or four more, because each coat has to dry before the next, then sanding, then texture or skim. A whole house is a week or two. Fast-setting compounds speed it up; humidity in a Tennessee summer slows it down. The schedule is set by the drying, not by the hanging.
Free estimate
Get drywall installation that blends into the wall
Send Nashville's Drywall Repair a picture of the damage and the texture around it, and the written estimate will name the patch method and the finish we will match.